carpvader.co.uk

Enterprise Nightlite Adaptor

Quiver/Rod Tip Nightlight Adaptor Suitable for use with Isotopes and other chemical nightlites, dia 3.0-4.5mm. They incorporate a soft rubber core that insures a secure grip on a wide range of tip diameters. They are re-usable and can be fitted and removed in seconds.

QUIVERTIP NIGHTLITE ADAPTOR: Contains 1 Small Adaptor for fine/medium tips, and 1 Adaptor for thicker tips and rod tips upto dia 2.0mm.


AVON/BARBEL ROD TIP NIGHTLITE ADAPTOR: Contains 2 Large Adaptors suitable for use with rod tip dia 2.0-2.6mm. This includes Avon style rods and barbel rods of 1 3/4lbs-2lb test curve.

Stonfo Levapiombo

Shots remover plier. One end of the tool is used to remove all sizes of shot and the other end is used to slide shot without damaging the line. It also serves to tighten Styls or Shots on the line.

Drennan Anglers Pliers

Produced in a graphite filled super plastic. These neat little pliers fit pocket or tackle tray and are tough enough to handle a wide range of angling tasks.

Middy Styl Pincers

Standard size, ideal for setting styls on your line. Styl weights are streamlined weights for pole rigs. Hold pincers in right hand, keep line taught with left hand then slightly squeeze weights into the position you require.

Middy Match Essentials Bait Needle

Mini size Match Hair Needle with protective end cap. Ideal to use with Middy hair hooks to nylon.

Middy Protector Scissors

Very sharp Japanese steel Protector Scissors with a protective cap. They are compact and easy to store.

Korda Razorblades

Ok, there are plenty of scissors already on the market but we felt we could still improve on these. All the versions currently available are generally made in a dull, carpy colours; meaning they are often lost amongst the undergrowth, not these babies! The handles have been manufactured in a bright Korda green, if you misplace these you need to go to 'Specsavers'!
The blades have been thoroughly field tested and definitely stay sharper than competitors.

Korda Rig Toolz Pulla

The Pulla has been specially designed so that the angler can easily pull knots tight on hook links and check that they are strong enough. The 2mm stainless steel hook fits perfectly through a Korda Size 8 Swivel or a link loop. This handy little tool makes tying rigs much easier as holding the swivel and tightening up can be a fiddly job.

Korda Rig Toolz Strippa

Since releasing our Hybrid hook link material we have been inundated with emails and calls from people enquiring how to strip it. For the last few years we have recommended using your teeth, which can't be doing anyone any favours for their dentist bills! Dave Gawthorn actually has a small groove in one of his teeth after prolonged coating removal!
Well we have now found an answer to this problem - the unique Strippa Tool. This is a simple but extremely effective device that can be used for all coated hook link materials, making it an absolute must have item for any serious carp angler.
The Strippa Tool is a small, neat product manufactured with Anodised Aluminium, in British Racing Green. This truly is a nail and teeth saviour for those anglers who love using coated hook links.

Korda Fine Baiting Needle

FINE LATCH NEEDLE - PURPLE HANDLE
Ideal for use with soft boilies, soft pellets, sweetcorn or splicing.

Korda Heavy Baiting Needle

HEAVY LATCH NEEDLE - BRIGHT GREEN HANDLE
Ideal for use with boilies and particles.

Korda Braid Needle

 

BRAIDED HAIR NEEDLE - YELLOW HANDLE
Ideal for hairs made with braid so it won't get caught in the fibres.

Korda Splicing Needle

SUPER STRONG SPLICING NEEDLE – ORANGE HANDLE
The perfect needle for splicing leadcore.

Korda Stik Needle

HEAVY LATCH STIK NEEDLE - RED HANDLE
Ideal for pulling hooklinks through sticks or making stringers.

Kryston Klin-Ik

The original formula Carp care anti-bacterial, anti-fungal and anti-viral solution.

Totally safe anti-sceptic one shot treatment that instantly sterilises.

Speeds up healing process and treats up to 300 fish.

Korda Carp Care Kit

No angler should call themselves an angler if they knowingly return a fish with visible mouth or body damage without doing something to help that fish. We all put hooks in fish and we all see fish on the bank that have been damaged through previous captures or by nature.

The 'Carp Care Kit' is a must have item for any angler and was designed by Thinking Anglers. As a result Korda have taken it on in their range to ensure that it is distributed into every anglers tackle box. It comes complete with two bottles (MOUTH & BODY). The 'Mouth' bottle covers any cuts or damage in that area with the 'Body' bottle proving essential to treat, sore, cuts and other visible damage.

This product really does work and should be promoted as an essential item in any anglers tackle box. With just a smear of treatment on any visible injury, you're giving that fish the best possible chance of recovery.

Korda Krusha

Long gone are the days spending hours in the kitchen mashing up potent-smelling fishmeal boilies in a food blender. Why, because the Krusha is here. There have been many devices over the years developed to crush up baits, such as the vegetable chopper, but most couldn’t handle the rigours of day-to-day carp angling. The blades would often bend, break or blunt and at times it could take hours to grind up a kilo of boilies, let alone tiger nuts or pellets.
The principle behind the Krusha was simple. We wanted to devise something that could crush up literally any bait out there within seconds; whether that be tiger nuts, pellets or air-dried boilies.
So, the Krusha was born. Created as an ultra-strong and robust device the Krusha uses its sharp teeth to work together in motion to ultimately demolish anything that you put before it.
Finished in a carpy, olive green colour and available in both large and small, the Krusha is perfect for the day-to-day carp angler and will become an asset in his or hers armoury.
Simply fill the Krusha on the section that states ‘fill’, place the other section over the top and begin to twist. The more vigorously you twist, the smaller the items will be. Grinding pellets to a mere dust creates a mighty fine bag mix and if you’re a fan of solid bags, look no further. The boilie particles will also be a fantastic addition to a stick mix, spod concoction or marginal blend. Experiment with literally anything and you could create the ultimate mix!
Marginal enthusiast Simon Scott was absolutely mindblown with the Krusha development and won’t go angling without one. He literally crushes up everything; from nuts, hemp, to boilies and pellets. He put the Krusha to the sword during a spring session on Churn Pool, situated in the Cotswolds, and caught many magnificent specimens to over 20lb – all over rock hard, chopped baits. What more can we say? Simply awesome!

Korda Rig Safe Hook Link Storage System

The Korda Rig Safe has been specially designed for the safe storage of all your rigs. Your hook link and hook are vital parts of your set up and need to be looked after. With rigs tied up you can easily store them by attaching the hook to the bar and kept straight and tidy by pinning the other end down using one of the rig pins. With plenty of space to keep over 50 rigs, you'll always be prepared!
Inside the Rig Safe we have incorporated a three section 'store' that you can keep items such as the rig pins, swivels or Kwik Links in. Constructed from ABS plastic, the nearly indestructible design should last a lifetime!

Nash Dipstick

No more Sticky Fingers!

This clever little tool is designed to remove boilies etc. out of your bait glug. Just press the plunger to extend the claws, place around the boilie and release the plunger. The Dipstic will grasp the sticky bait to allow its removal without getting the glug all over your fingers. It is laso very handy to get hold of other small objects, especially if they are in a small space where you can't get into very easily.

Nash Knotloc Glue

The best rig glue we have found, a quick setting glue with many applications.
We recommend that you glue all your hooklink and main line knots.  This simple action eliminates any chance of knot slip that could dramatically reduce your knot strength.

Nash Captive Boilie Needle

Nash Boilie Nut Drill

Nash Captive Stringer Needle

This extra long needle enables a line of boilies to be mounted in one go onto PVA tape/string or multi-bait long hair rigs

ESP Bait Drill & Needle Ultra Fine

These Ultra Fine, 1mm diameter Bait Drill and Needle are ideal as they give less problems of splitting the baits. Even small trout pellets can be drilled with ease.

ESP Splicing Needles

These are ideal for splicing joints with Leadcore.  The ultra fine spring stainless steel needles ensure that spliced joints are extremely neat and much stronger than any knot - also the needles make excellent bait needles for small baits such as sweetcorn and soft boilies.

Fox Special Edition Needle Set

This special edition needle set comprises three dedicated Needles to cover all baiting and rig making eventualities. Produced in a distinctive carpy olive green, with soft touch rubber overmould handles which have been CAD engineered to be ergonomic and comfortable to use.

Multi Needle
An extremely versatile baiting needle that is perfect for attaching all kinds of baits to hair rigs. The rigid shaft will comfortably pierce the largest of boilies, while unlike other designs which have tapered shafts, the needle will not split large, hard baits.

Stringer Needle
The B8 Stringer Needle is designed for creating ‘stringers’ of bait using PVA tape or string. This very effective method presents small clusters of bait in immediate proximity to the hookbait.

Lip Close Needle
The Lip Close Needle is purpose designed for use with very soft baits and for tackle jobs such as sliding pieces of silicone onto tubing or leadcore. The closing gate prevents the needle hook from snagging and retains the hair loop securely during threading.

Fox Splicing Needle

Splicing Needles are designed specifically to neatly splice loops or join monofilament lines to Fox Leadcore. The micro engineered hinged lip has a closing gate which captures the fibres and prevents snagging. The shaft is low diameter stainless steel which also makes them for hair rigging very small or soft baits without splitting them.

Fox Nut & Pellet Drill 1.5mm

The Fox 1.5mm Nut Drill is an extremely useful tool which will allow all manner of hard baits to be mounted onto a hair rig style presentation.

Perfect for drilling fine holes through the centre of any hard bait from trout pellets through to nuts, air dried boilies and floating pellets. This removes the need to use a needle which can be dangerous.

The corrosion resistant stainless steel needle is insert moulded to a dual material ergonomically designed handle with a soft touch rubber grip.

Fox Stix Baiting Needle

The Stix baiting needle has been designed to make easy threading of PVA sticks directly onto the hooklink. It is also invaluable as a stringer needle and features a 135mm steel shaft with a hinged gate closure. This allows the hooklink loop to be pulled through the PVA stick without tearing or laddering the PVA mesh. The needle is set into an ergonomic, soft touch handle to make a durable and versatile baiting tool.

Fox Powergrip Knot Puller

 

wergrip Knot Puller      

• Ergonomically designed to fit comfortably in the hand.


• ‘Soft Touch’ rubber moulded handle.


• Stainless steel hook.

Fox Knot Picker

Ideal for unpicking tangles and loosening wind knots in braided and mono lines. Features a tough rubber grip, stainless steel stem, and is supplied with a protective push on cover.

Fox Bait Tigernut Drill & Cork Sticks

The Bait / Tigernut Drill features a unique point shape which has been specifically chosen to make the drilling of hard baits such as tiger nuts, quick and easy. The cork plugs are exactly the same diameter as the drill shaft enabling the drilled hole to be filled with a perfectly fitting cork insert. Using this system allows baits such as tigernuts and brazils to be made buoyant or semi buoyant whilst keeping the cork invisible inside the hook bait.

Fox Cork Sticks Refill Pack

Quantity 10 items per pack. Diameter 6mm and Length 70mm. Ideal for tigernut and other baits.

Fox Diamond Hook Sharpener

The Diamond Hook sharpener is designed to hone hooks to a perfect needle point. Suitable for all hook patterns and sizes, the file allows the angler to touch up single or treble hooks that have been blunted during the capture of a fish or in general use. The file is set into a durable, easy grip rubberised handle and allows the angler to keep all hooks razor sharp.

Fox Maggot Tweezers

Maggot Tweezers assist in the loading of Fox Maggot Clips.

Wychwood Bait Dropper

Large bait dropper, ideal for all forms of river fishing. Metal long-lasting design. Take approximately 1/8 pint of bait.

Wychwood Stumpy Safety Needle

Featuring a fine, flat profile needle, rounded end and lip close to prevent sharp points causing unnecessary damage to your fingers, hands or the baits being pierced. Hairs are also kept from slipping from the needle during mounting. Perfect for softer baits like frozen boilies and meat.

Wychwood Stumpy Nut Drill

The Stumpy Nut Drill features a low diameter drill bit, easily twisted between finger and thumb thanks to the short handle. It makes short work of hard particle baits like tiger nuts, pellets, dog biscuits or air dried boilies before mounting on the hair with a needle.

Wychwood Stumpy Stick Needle

The Stumpy Stick Needle is extra long to allow PVA 'sticks' of groundbaits to be pierced. A lip close end retains looped hook lengths securely and allows them to be pulled through and into 'sticks' with the minimum of damage to the PVA, making rebaiting effortless.

Twin Function Boilie Tool

Multi function tool incorperates both a drill and baiting needle

Boilie & Nut Drill 4mm

Budget priced but effective drill for both nut and boilies.

30 Plus Bait Drill

A practical bait drill which can be used for drilling nuts, mixers and all hard baits like pop-ups. Easy grip handle and very visual at night.

30 Plus Stringer Needle

An elongated needle designed for constructing stingers

Features an easy grip handle and glows in the dark

Suitable for all manner of soft carp baits from whole to half boilies, meat baits and even pre-soaked mixer baits

Enterprise Ultra Violet Torch

Designed to 'charge up' our new 'Niteglow Corn' and 'Hi- Power Glow Sticks', this Ultra violet torch is the most efficient light source to charge luminous products.
The torch can be operated by either depressing the button or sliding the switch over to give continuous light. Charge the corn for approximately 15 seconds, holding 1 -2" (25 - 50mm) away from the torch, slowly rotating it in the beam to ensure all areas are fully charged. Supplied with 4 Neon Blue and 4 Neon Green Niteglow Corn grains

Seymo Speci-Lunch Punch 20mm

A 20mm punch that easily cuts meat, bread, cheese etc. Ideal for the specimen angler.

Seymo Lunch Punch

Simply push barrel head into luncheon meat, push plunger to extract and cut into required thickness. For bread, just punch through a slice and hook up.

Available in 8mm and 12mm sizes.

Seymo 2x2 Professional Bread Punch Set

2 x 2 professional bread punch, easy grip with 4 different sizes of punch

Red = 5.0mm, Green = 4.0mm, Blue = 3.0mm, Black = 2.5mm

Fox Bread Punch Set

Precision bread punches designed for fishing punched bread from 2mm-7mm, ideal for roach, skimmers & bream.

• Soft touch, anti-roll rubber grip
  
• Chamfered brass head
  
• Side cut for hooking out pellet

Fox Square Meat Punches

Designed to cut cubes of luncheon in three different sizes, fresh for the hook. Similar to the Fox round meat punches but being square they mimic the loose feed offerings commonly fed on all commercial fisheries where meat is used. Ideal for carp, barbel, bream & chub.

• Unique square pellet to match the shape of chopped meat.
  
• Soft touch handle.
  
• Anti roll handle - triangular profile to prevent rolling off the bait tray.
  
• 3 sizes to cover all match situations (4mm, 6mm and 8mm).
  
• CAD engineered and injection moulded for long lasting durability.

Matchman Hook Tyer

The most popular hook tyer in use today. Make a perfect job every time.

Stonfo Hook Tyer

Device for tying a line to a fishing hook with soft touch handle. Produced in two different sizes: the Small is specially designed for very small hook sizes from nr.14 to 28, the Large is suitable for hook sizes from nr.6 to 18. Supplied with full instructions.

Stonfo Calibre for Loop

It allows to tie the perfect loop of the desired size. (5-25 mm). Perfect loop knots at the end of your hooks to nylon etc.

Band-It Bait Banding Tool

Specialist Bait Banding Tool. Quick & easy action and suitable for use with latex & silicone bait bands for pellets sized between 3 -12mm.

Band-It Pellet Bands

• One size fits all 4-12mm
• Super Stretch Latex
• For use with Band-It Bait Banding Tool.

Maver Line Marker

New wax based line marker, available in orange. It is also ideal for marking the depth on the pole, using as a bristle grease for pole floats or colouring the bristle of float tips.

Wychwood Stumpy Splicing Needle

The Stumpy Splicing Needle has a fine diameter to slide effortlessly into the woven outer sheath of lead core, the small lip close end allowing it to be pulled back through the fibres without snagging for quick, easy construction of spliced loops on the end of lead core leaders. It also doubles as a useful baiting tool for mounting boilies, maggots and soft baits like corn on hairs that can easily split with larger diameter needles.

Seymo Meat Cutter 8mm

The Seymo 8mm meat cutter cuts cans of luncheon meat into cubes cleanly, swiftly and accurately.

Nash Tube Tool

A brilliant tool for mounting tail rubbers and mouldings onto tubing and/or leaders. Slide the moulding over the tube tool spigot, locate your tubing/leader inside the tube tool bore and slide the moulding off the spigot onto the tubing/leader. The tube tool is one of those gadgets that make a fiddly job simplicity itself.

Fox Bait Compactor

The Bait Compactor is a purpose designed de-luxe plunger for use with the popular PVA funnel systems. Featuring a unique interchangeable head which allows it to be used with both wide and narrow funnel formats and incorporating a rigid, super strong shaft with an easy grip rubber handle.

Fox F Box 2 Compartment

The original Fox Box System has become the first choice of tackle storage for a huge number of anglers. This classic modular format has been redesigned and restyled as the F-box with genuine improvements including waterproof rubber seals, non mix compartments, super strong hinges, reliable slide closure and practical ergonomic styling to make tiny tackle items easily accessible.

This 2 compartment integral box features two equal singular sections and is designed to fit into large or medium F-boxes. Ideal for storing baiting accessories such as cork sticks, bait drills, needles and hairstops.

The box features a waterproof seal, long life hinges and a secure locking slide catch.

Fox F Box 3 Compartment

Fox F Box 4 Compartment

The original Fox Box System has become the first choice of tackle storage for a huge number of anglers. This classic modular format has been redesigned and restyled as the F-box with genuine improvements including waterproof rubber seals, non mix compartments, super strong hinges, reliable slide closure and practical ergonomic styling to make tiny tackle items easily accessible.

This 4 compartment integral box comprises four equal sections and is designed to fit into large or medium F-Boxes. Perfect for separating larger tackle items such as shrink tube, bolt clips and tail rubbers.

The box features a waterproof seal, long life hinges and a secure locking slide catch.

Fox F Box 6 Compartment

Fox F Box 8 Compartment

The original Fox Box System has become the first choice of tackle storage for a huge number of anglers. This classic modular format has been redesigned and restyled as the F-box with genuine improvements including waterproof rubber seals, non mix compartments, super strong hinges, reliable slide closure and practical ergonomic styling to make tiny tackle items easily accessible.

This 8 compartment integral box features two rows of four equal sized sections and is designed to fit large or medium F-Boxes. Perfect for separating very small items such as hooks, swivels, rings and beads.

The box features a waterproof seal, long life hinges and a secure, locking slide catch.

System Fox Box 8 Compartment

Integral 8 compartment box featuring two rows of four equal sized sections. Perfect for separating the smallest rig making items such as hooks, swivels, rings and beads.

• (d) 25mm x (l) 104mm x (w) x 65mm

Fox Power Guard Mini Multi Bait Catapult

The Power-Guard Mini-Multi Bait is a lightweight catapult designed to introduce multiple baits at medium to long range, with pinpoint accuracy and precision.

The unique, patented knuckle defender protects the hand during use, taking the sting out of baiting up. The sculptured grip features a soft touch rubber overmould which is designed to fit comfortably for either left or right handed users.

The one piece moulded pouch eliminates any possible weak spots by avoiding welding and stitching. The special design provides exceptional durability while the uniquely riveted base creates an ultra strong pull point for firing baits under maximum compression.

The length and specification of the latex is the result of many months field testing and data compiling. These 13” lengths combined with the heavy duty latex enable multiple baits to be fired accurately and consistently.

Fox Power Guard Mega Distance Boilie Catapult

The Power-Guard Mega Distance Boilie is designed to introduce single and double baits at long range, with pinpoint accuracy and precision.

Power Guard Distance Boilie
The unique, patented knuckle defender protects the hand during use, taking the sting out of baiting up. The sculptured grip features a soft touch rubber overmould which is designed to fit comfortably for either left or right handed users.

The one piece moulded pouch eliminates any possible weak spots by avoiding welding and stitching. The special design provides exceptional durability while the uniquely riveted base creates an ultra strong pull point for firing baits under maximum compression.

The length and specification of the latex is the result of many months field testing and data compiling. These 12” lengths combined with the extra heavy duty latex enable single baits to be fired accurately and consistently to great range.

Fox Power Guard Mini Distance Boilie Catapult

The Power-Guard Mini-Distance Boilie is designed to introduce single and double baits at long range, with pinpoint accuracy and precision.

The unique, patented knuckle defender protects the hand during use, taking the sting out of baiting up. The sculptured grip features a soft touch rubber overmould which is designed to fit comfortably for either left or right handed users.

The one piece moulded pouch eliminates any possible weak spots by avoiding welding and stitching. The special design provides exceptional durability while the uniquely riveted base creates an ultra strong pull point for firing baits under maximum compression.

The length and specification of the latex is the result of many months field testing and data compiling. These 12” lengths combined with the extra heavy duty latex enable single baits to be fired accurately and consistently to great range.

Fox Mega Distance Boilie Catapult Spares Kit

This convenient Power Guard spares kit contains a Distance Boilie Pouch, ready assembled with latexes and screw top attachments to provide quick and easy fitting to your Mega Power Guard frame.

Fox Mini Multi Bait Catapult Spares Kit

This convenient Power Guard spares kit contains a Multi Bait Pouch, ready assembled with latexes and screw top attachments to provide quick and easy fitting to your Mini Power Guard frame.

Fox Mega Method Catapult Spares KIt

This convenient Power Guard spares kit contains a Method Pouch, ready assembled with latexes and screw top attachments to provide quick and easy fitting to your Mega Power Guard frame.

Fox Protecta Spool Band - Standard Size

Protecta Spool Bands are constructed from hard wearing neoprene to provide a protective cover to the reel line when in transit or storage.

Each band securely fits around the spool ensuring that the mainline cannot get damaged and remains clean and protected from UV light.

Featuring a soft touch moulded tab for ease of removal.

Fox Rangemaster Throwing Stick

The Rangemaster Throwing Stick is CAD designed to impart the maximum velocity and distance when loose feeding boilies. The special curve imparts spin to the bait providing outstanding range and accuracy. Formed from a flexible,highly robust tube and fitted with a non-slip rubberised handle which provides a solid grip even with wet hands. The ultra lightweight construction prevents ‘throwing stick elbow’ during prolonged use, when baiting up heavily, or propelling single baits to the limit of distance.

• Throwing sticks, once mastered, provide an unrivalled method of introducing boilies at medium to long range


• For best results the ‘throw’ needs to be stopped at about the 2 o’clock position


• For consistent accuracy use in conjunction with a Fox Boilie Bum bag


• To prevent baits from splitting in flight, wet the inside with lake water and drain out


• Can be used with single or multiple baits

Avvailable in 18mm,  24mm  and  30mm bore sizes.

Korda Eazi-Stik Throwing Stick - 20mm Bore

Producing a Throwing Stick is an unusual step away from Korda's speciality of leads and rig gear. Danny does nothing without good reason - his first experience of this baiting tool came at Shimano Linear fisheries in Oxford.
Danny quotes: “ I was amazed at how light it was and was more amazed that I could actually use it effectively. Prior to using this design I simply could not use a throwing stick of any description” - The Eazi-Stik was born.
Credit for the design has to go to long-range guru Frank Warwick. His knowledge of carping and his distinct northern styles are an invaluable asset to Korda.
WHY EASI-STIK IS THE BEST ON THE MARKET
Long straight shaft- Because the boilie has to travel further before it leaves the stick more speed is generated - The faster the boilie travel the further it travels - field testing this length generated maximum speed without increasing the effort required to move the stick through the air.

Made from ultra light polycarbonate plastic- Using this material makes the Eazi-Stik incredibly light, making baiting effortless. It greatly reduces fatigue on your arm which is a major bonus because most sticks kill your arm. Take care though, accidentally hitting the ground on the follow through can damage this stick. Keep it out of direct sunlight in the heat of summer as prolonged exposure to temperatures of 25 degrees C can warp the shape. Thankfully this only applies to about four days of an English summer.

Unique J shape- The 'bend in the end' of the Eazi-Stik is essential to its performance - This long J shaped bend increases back spin on the boilie - The back spin 'lifts' the boilie in flight greatly increasing distance.

(20cm) Ultra slim textured handle - The broken texture of this rubberised handle creates the right amount of friction with your hand to ensure a firm grip - This stops the stick twisting in your hand on the downward stroke keeping the baits straight. Great effort was put into keeping the handle as slim as possible - This substantially reduces fatigue on your forearm which is a problem found in most other sticks. The handle was made 8" long to allow one or two-handed grip.

Fox Protecta Reel Pouch

Manufactured from shock absorbent 3mm neoprene, these pouches will protect your valuable reels from ‘scuffs’ and ‘knocks’ that often occur whilst using slings or quivers that leave the reels exposed. The 'envelope' design allows the pouches to fit over the reel and back around the rod handle to hold it securely in position with a secure Velcro closure. Featuring a pair of mesh apertures which allow moisture to escape from wet reels, these pouches are also ideal for storing spare reels that may be carried within your tackle bag.

The 'Protecta Reel Pouch' cover is designed to securely encapsulate most sizes of standard carp/specialist reels.

Dimensions = Height x Width x Depth
Standard Reel Pouch
Main Body = 170mm x 95mm x 140mm

Fox Protecta Big Pit Pouch

Manufactured from shock absorbent 3mm neoprene, these pouches will protect your valuable reels from ‘scuffs’ and ‘knocks’ that often occur whilst using slings or quivers that leave the reels exposed. The 'envelope' design allows the pouches to fit over the reel and back around the rod handle to hold it securely in position with a secure Velcro closure. Featuring a pair of mesh apertures which allow moisture to escape from wet reels, these pouches are also ideal for storing spare reels that may be carried within your tackle bag.

The bigger 'Big Pit Pouch' is designed for most sizes of big pit reel.

Dimensions = Height x Width x Depth

Big Pit Reel Pouch
Main Body = 180mm x 105mm x 200mm

Fox Tip & Butt Protecta

The Tip and Butt Protecta are designed to encapsulate both ends of a collapsed rod, holding the section securely side by side to prevent damage during transit and storage.

Tip and Butt Protecta, perfect for securing rods that are carried separately such as floater, spod and marker rods and also ideal for retaining rods during short sessions without a holdall or sling.

Manufactured from high quality 3mm olive green neoprene with velcro webbing straps for solid attachment to the rod sections.

Fox 3 Rod Captive Backlead Bar

Developed for use with Stalker, Horizon ans A-Pods, Tthe Backlead Bar is designed to fit neatly between the front two  banksticks providing secure, fixed positions for attaching captive backleads.

Fox Magic Marker

Magic Marker is a super soft, braided fluorescent material designed for tying highly visible range marker knots onto the mainline. These prove invaluable for accurate recasting to baited areas or features, particularly in darkness. The braid will not damage the line and is easy to remove with clippers after use.

Available in fluorescent orange colour, highly visible in low light levels. When used in conjunction with the reel line clip, Magic Marker Braid enables easy repositioning of the rig after a fish capture and will genuinely help to catch more carp.

Delta Bond Glue

Extremely effective Super Glue especially designed for the fishing industry. Completely waterproof - will not degrade whippings or nylon mono.

Breakaway Cannon Thumb Button

Bionic finger for casting fixed spool reels

Ideal for spodding etc.

Prevents damage to your finger when casting

Breakaway Thumbutton

Fixed spool reel release aid for accurate, easy casting without pain.

Daiwa Mission Scales

Top quality Scales from the mission range, weighs upto 50kg, easy to read dail. Never have to estimate the weight of that fish again.

Fox Digital Scales

Fox Digital Scales are highly calibrated units, providing anglers with quick, accurate readings.
A built in storage facility allow weights to be recorded and retractable hooks make the Digital scales compact and easily portable when not in use.
Fox Digital Scales feature
- 30Kg capacity
- Clip on hard casing for protective transit
- Easy to use push button system
- Fold out Soft touch easy grip handles
- Retractable weighing eye
- Large easy to read LCD panel with backlight facilities
- Read out in pounds or kilos
- Can be zeroed to any size of weigh bag
- Storage facilities for catch records
- Built in clock and alarm

RRP £99.99

Berkley Quick Set Rod Holder

This is an ideal addition to your boat, an easy to install rod holder that has a quick set mechanism to hold your rod when fishing.

Berkley Portable Line Spooling Station

Berkley Universal line spooling station with built in line stripper. These simple spooling stations are amazing, it takes the hassle out of holding the line spools during loading line onto both fixed spool and multiplier reels. The line stripper removes line from reels in double quick time and also has a rotating hook sharpener as a bonus.

Some customers have said that it has saved their marriage!

RRP is £30.50

Heavy Duty Crimping Pliers

Designed to produce perfect crimped sleeves on rigs

Forceps

Stainless Steel Forceps available in sizes:  6ins,  8ins,  10ins.